
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X30-30S is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M8x1.25) adjuster screw lets you dial the extend position down from the nominal 30 mm to zero directly on the machine, eliminating the need for shims or part swaps. Retract remains full length.
The short riveted body minimizes axial footprint, while a fixed NBR bumper decelerates the stroke end. The built-in -S magnet supports AirTAC reed or electronic switches for precise position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact extend stop from 0 to 30 mm during prototype runs to find the optimal clamping depth before locking the M8x1.25 screw.
Set a precise lower mechanical stop for a 12.5 kg vertical lift, ensuring the load bottoms out safely on the bumper rather than relying on valve pressure.
Choose this model when your fixture requires on-site stroke tuning during setup or changeovers. Confirm the 30 mm stroke, 30 mm window, M5x0.8 port, female M5x0.8 rod thread, and the included magnet. Remember that a plain cylinder does not hold position if air is lost or the valve centres; use an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The included -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.