
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X35-10B is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the external R (M8x1.25) adjustment screw, you shorten the forward stroke anywhere between 25 and 35 mm without swapping parts.
This variant uses a male M8x1.25 piston rod thread and includes no piston magnet. Its short riveted body saves axial mounting depth where round-body units will not fit. A fixed NBR bumper handles end-of-stroke deceleration, while the bore accepts standard AirTAC compact-cylinder accessories.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 25 and 35 mm during fixture setups to accommodate varied part heights without machining new spacers.
Use the male M8x1.25 rod to dial in the exact insertion depth of locating pins on high-mix assembly lines.
Choose it when you need on-site stroke tuning to perfect a tooling position.
Confirm your parameters: 25 mm bore, 35 mm maximum stroke, 10 mm adjust window, M5x0.8 port, and a male M8x1.25 rod thread. Note that a plain SDAJ does not hold position if air pressure drops or the valve centers—the piston drifts, as the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the R (M8x1.25) screw shortens the extend stroke by up to 10 mm, yielding a usable 25 to 35 mm forward range. The screw acts only as a mechanical stop and does not lock the piston; for load holding without live air, use an external rod lock or pilot-operated check valve. This SKU lacks the -S magnet, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.