
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X35-40 is a double-acting compact cylinder featuring an external R (M8x1.25) adjuster screw that dials the extend stop from 0 to 35 mm directly on your machine. Retract travel stays full length while the extend end-position is trimmed on-site without shims or part changes.
Its short riveted body minimizes axial mounting depth where round-body or profile cylinders will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site for different carton depths, letting the fixed NBR bumper absorb the end shock repeatedly during high-speed packaging runs.
Fit the compact riveted body into tight axial spaces to press light assemblies, relying on the 12.5 kg vertical lift capacity to seat components securely.
Choose this model when you need frequent on-machine stroke tuning during changeovers.
Confirm your parameters: 25 mm bore, 35 mm nominal stroke, 40 mm window, M5x0.8 port, female M5x0.8 rod-end thread, and no magnet. A plain cylinder drifts on air loss or valve centring—the fixed bumper only decelerates near the end and is never a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M8x1.25 R screw shortens the extend stop by up to 40 mm, providing a usable extend range of 0 to 35 mm while retract remains full. This SKU has no piston magnet and cannot take a switch; you must select the -S variant to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.