verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke35 mm
  • Adjustable range0–35 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.99 $40.49Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B

The AirTAC SDAJ25X35-40B is a double-acting compact cylinder featuring an external adjustable extend stop. An M8x1.25 R screw lets you dial the forward end-position from 0 to 35 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

This thin riveted-body design saves valuable axial mounting depth where round-body or profile cylinders cannot fit. It features a 10 mm piston rod with a male M8x1.25 thread end, and relies on a fixed NBR bumper at each end to decelerate the stroke. This SKU ships without a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke35 mm
Adjustable range0 – 35 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×35Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B Is Used

precision_manufacturing

Trial Positioning Jigs

Dial in the exact 0-35 mm extend stop during prototype runs.

sync_alt

Quick Changeover Lines

Swap product variants fast by turning the M8x1.25 adjuster screw. The male M8x1.25 rod threads directly into varying tooling plates without adapters.

vertical_align_center

Vertical Lift Stops

The mechanical stop sets the exact raise height, though an external check valve is needed to hold the load if air drops.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B the Right Cylinder?

Choose this specific model if your fixture requires on-site extend tuning within the 0-35 mm window.

Verify your requirements against the configured options: a 25 mm bore, 35 mm maximum stroke, 40 mm adjustment window, and an M5x0.8 air port. This variant includes the -B option for a male M8x1.25 piston rod thread and lacks the -S magnet. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the bumper only decelerates near the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B FAQ

The air port is M5x0.8.

The R (M8x1.25) screw shortens the extend stroke by up to 40 mm, giving a usable extend range of 0-35 mm without changing parts. This specific SKU lacks a piston magnet, so it cannot take magnetic switches; you would need the -S variant for reed or electronic sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X35-40B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X35-40B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.