
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X40-10B is a compact double-acting cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke down from the 40mm maximum to a 30mm minimum directly at the machine, eliminating the need for shims or part swaps.
This variant features a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body minimizes axial mounting depth where space is tight, while a fixed NBR bumper decelerates the piston at the end of travel. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M8x1.25 adjuster to shift the extend stop between 30 and 40 mm when swapping machining fixtures, ensuring precise contact without fabricating new spacers.
Use the 10mm adjustment window to find the exact extension point during prototype assembly, locking the mechanical stop once the ideal 12.5 kg vertical lift geometry is found.
Choose this 25mm bore if your setup requires fine-tuning the extend position within the 30-40 mm window on-site.
Confirm the 40mm maximum stroke, 10mm adjustability window, and M5x0.8 air port for your plumbing. This specific SKU includes the male M8x1.25 rod (-B) and no magnet. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The air port is M5x0.8.
Turning the R (M8x1.25) screw shortens the extend end-position by up to 10mm, giving a usable 30-40mm range. This sets a mechanical stop and does not alter force. The cylinder cannot hold a load on air loss; you need an external rod lock or pilot-operated check valve for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.