
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-20 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X40-20 is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke from 20 to 40 mm directly on the machine, eliminating the need for shims or part swaps.
Its short riveted body minimizes axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. This SKU ships without a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if sensing is required.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rotate the M8x1.25 screw to shift the extend stop between 20 and 40 mm during product format changes, avoiding teardown.
Set the 10 mm rod extension precisely to bend carton flaps of varying heights at 30-500 mm/s.
When sizing this 25 mm bore, evaluate both neighbors.
Choose this unit for setup-heavy lines needing on-site stroke tuning between 20 and 40 mm. Confirm the 10 mm rod, M5x0.8 port, female M5x0.8 rod thread, and 20 mm adjustment window. Remember that a plain SDAJ does not hold position on air loss; add an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the external M8x1.25 screw shortens the extend stop by up to 20 mm, yielding a usable outward range of 20 to 40 mm. The retract stroke remains full, and the screw acts as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.