
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X40-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the forward stroke anywhere between 20 and 40 mm directly on the machine without changing parts.
This variant includes a male-thread M8x1.25 piston rod for secure tool mounting and saves valuable axial depth via its short riveted body. End-of-travel shock is managed by a fixed NBR bumper, which decelerates the piston rather than acting as a lock. Note this specific SKU lacks a piston magnet and therefore cannot support position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 40 mm on the fly to accommodate varying jig heights during production line changeovers without swapping cylinders.
Use the mechanical stop to probe the correct extend endpoint during prototype assembly, locking the R screw once the optimal 20-40 mm depth is found.
This model is ideal for setups requiring frequent on-machine stroke tuning during changeovers. Keep in mind the fixed NBR bumper decelerates the stroke end but does not hold the load; if air pressure drops, the piston drifts, so employ an external rod lock or pilot-operated check valve for load holding. Configuration confirmed: 25 mm bore, 40 mm max stroke, 20 mm adjust window, M5x0.8 port, male M8x1.25 rod thread, and no magnet.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the M8x1.25 R screw shortens the extend end position by up to 20 mm, allowing usable strokes between 20 and 40 mm. It acts purely as a mechanical stop and does not alter the cylinder force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.