
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-30 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X40-30 is a double-acting compact cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop anywhere between 10 and 40 mm.
Its short riveted body drastically reduces axial mounting depth where larger profile variants fail to fit. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so position sensing is not supported without switching to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 10 to 40 mm extend position on the fly to accommodate different jig heights during production line changeovers.
Use the M8x1.25 adjuster screw to find the exact 12.5 kg vertical lift point before locking down the final mechanical stop.
Dropping down to an SDAJ20 yields 157.1 N, while stepping up to an SDAJ32 provides 402.1 N, making the 25 mm an ideal middle ground for moderate loads.
This model is tailored for operators needing on-site stroke tuning during frequent changeovers without swapping parts. Remember that the mechanical stop and fixed bumper do not secure the load if air pressure drops; utilize an external rod lock or pilot-operated check valve for holding requirements. Configuration details include a 10 mm rod, M5x0.8 port, female rod-end thread, and a 30 mm adjustment window.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The M8x1.25 screw shortens the extend stop by up to 30 mm, yielding a 10 to 40 mm usable range. It is strictly a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load without live air pressure or an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.