
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X40-30S is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere from 10 to 40 mm without swapping shims or parts, making it ideal for trial positioning. Retract travel remains full length.
The short riveted body conserves axial mounting depth where a longer cylinder will not fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the end of travel.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 40 mm to find the exact contact point for a 12.5 kg vertical lift without machining new spacers.
Leverage the short riveted body to fit ejection mechanics into tight tooling bays where standard profile cylinders demand too much depth.
Choose this specific model if your fixture requires frequent on-machine stroke tuning during product changeovers.
Verify your parameters: 25 mm bore, 40 mm maximum stroke, 30 mm adjust window, M5x0.8 port, and a female M5x0.8 rod-end thread. The -S suffix confirms the internal magnet for position sensing. Remember that a plain compact cylinder does not hold a load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of stroke. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 R screw shortens the extend stop by up to 30 mm, giving a usable forward range of 10 to 40 mm. The -S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.