
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-40 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X40-40 is a double-acting compact cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop from 0 to 40 mm directly on your machine.
Its short riveted body significantly cuts axial mounting depth where larger profile or round-body units cannot fit. The bore dictates an M5x0.8 air port and a 10 mm piston rod, while end-of-stroke energy is managed solely by a fixed NBR bumper that decelerates the piston rather than acting as an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X40-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 40 mm |
| Adjustable range | 0 – 40 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 40 mm to find the exact contact point for custom gauging fixtures without machining new spacers.
Set a precise mechanical stop for delicate clamping tasks, relying on the fixed NBR bumper to absorb the end-of-stroke shock safely.
Choose this model if your fixture requires frequent on-site stroke tuning during changeovers.
Verify your build needs a 40 mm maximum stroke with a 40 mm adjustment window, an M5x0.8 port, and no piston magnet (this SKU lacks the -S option and cannot host reed or electronic switches). Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper and mechanical stop do not lock the load, so specify an external rod lock or pilot-operated check valve for holding requirements.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external R (M8x1.25) screw shortens the extend stroke by up to 40 mm, allowing the rod to stop anywhere between 0 and 40 mm. The retract stroke remains full, and the adjuster acts purely as a mechanical stop without changing the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.