verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke45 mm
  • Adjustable range35–45 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$34.86 $42.36Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B

The AirTAC SDAJ25X45-10B is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M8x1.25 adjuster screw lets you dial the forward stop anywhere between 35 and 45 mm without swapping shims or parts.

This variant features a male M8x1.25 piston rod thread and lacks a piston magnet, so it cannot host reed or electronic switches. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a load-holding brake.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke45 mm
Adjustable range35 – 45 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×45Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 35 to 45 mm during machine changeovers to accommodate different part heights without fabricating new spacers.

straighten

Bending Stops

Set a precise mechanical end-position for thin-gauge metal forming, using the male M8x1.25 rod to mount custom tooling.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B the Right Cylinder?

Choose the SDAJ25X45-10B specifically for setups requiring precise 35 to 45 mm forward positioning via the male M8 rod.

Confirm your parameters: 25 mm bore, 45 mm maximum stroke, 10 mm adjust window, and an M5x0.8 air port. Remember that a standard cylinder drifts when air is lost or the valve centers, as the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For suspended loads without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B FAQ

The theoretical maximum push is 50 kgf at 1.0 MPa.

This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-10B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X45-10B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.