
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-20 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X45-20 is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M8x1.25 adjuster screw lets you dial the forward end-position anywhere between 25 and 45 mm without swapping shims or parts.
Its short riveted body significantly cuts axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 45 mm on the machine to accommodate different jig heights without machining new spacers.
Set the exact 12.5 kg vertical lift reach during prototype runs by adjusting the M8x1.25 screw until the kinematics are perfect.
Choose it when you need frequent on-machine stroke tuning during setup or product changeovers.
Confirm the 45 mm maximum stroke, 20 mm adjust window, and M5x0.8 port. The female M5x0.8 rod-end thread handles the load, but avoid side loading. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 screw mechanically shortens the extend stroke by up to 20 mm, giving a usable range of 25 to 45 mm. This SKU has no piston magnet and cannot take a switch; you must select the -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.