
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X45-20B is a compact double-acting double-rod cylinder built for tight axial spaces. A short riveted body minimizes mounting depth where larger profile housings fail to fit.
An external M8x1.25 adjuster screw lets you dial the extend stop down by 20 mm directly on the machine. You can set the outward travel anywhere between 25 and 45 mm without swapping shims or parts. This SKU features a male M8x1.25 piston rod thread and lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the male M8 rod reach on-site during conveyor changeovers to push varying box sizes into the correct sorting lane.
Adjust the mechanical stop on the fly for different carton depths, ensuring the riveted compact body fits neatly within tight packaging machinery frames.
When sizing this 25 mm bore, verify your force needs both ways.
Choose this unit when setup requires frequent on-machine stroke tuning across a 25 to 45 mm window. Confirm your spec sheet lists the M5x0.8 port, the 20 mm adjustment range, and the male M8 rod thread. Remember that a plain cylinder drifts if air pressure drops; the fixed NBR bumper only decelerates the stroke end and never locks the load. For secure holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 50 kgf at 1.0 MPa.
Turning the external M8x1.25 screw shortens the extend end position by up to 20 mm, allowing you to set the outward stroke anywhere from 25 to 45 mm. The retract stroke remains full, and the adjuster only sets the stop without altering the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.