
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-20S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X45-20S is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop directly on your machine between 25 and 45 mm.
Its short riveted body drastically reduces axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion, and the included piston magnet supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the rod extension on-site during carton size changeovers, using the fixed NBR bumper to absorb the repetitive end-of-stroke shock safely.
Adjust the mechanical stop to match varying panel widths on the fly while the built-in magnet triggers an electronic switch to confirm the retracted position.
This specific configuration includes the -S magnet for sensing and a female M5x0.8 rod-end thread.
Operators who require frequent changeovers or trial positioning will benefit from the 20 mm on-site adjustability window. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 R screw shortens the extend stroke by up to 20 mm, yielding a usable 25 to 45 mm range without changing parts. The -S option adds a piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.