
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X45-30S is a compact double-acting double-rod cylinder built for on-site stroke tuning. An external M8x1.25 adjuster screw lets you dial the extend stop anywhere between 15 and 45 mm, eliminating the need for shims or part swaps during machine commissioning.
The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. This 25 mm bore variant features a 10 mm piston rod, an M5x0.8 air port, and a female M5x0.8 rod-end thread. The included -S magnet supports position sensing with AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke ends.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 45 mm |
| Adjustable range | 15 – 45 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 45 mm via the M8 screw to accommodate varying jig heights on machining lines without machining new spacers.
Fine-tune nozzle approach depth on the fly for different vial heights, ensuring the 10 mm rod avoids crashing delicate glassware during setup.
Choose this specific bore if your setup requires precise extend positioning within a tight footprint.
The on-machine adjustability is ideal for trial positioning and frequent changeovers. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 45 mm maximum stroke, 30 mm window, M5x0.8 port, built-in magnet, and female rod thread.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The M8x1.25 adjuster screw shortens the extend stroke by up to 30 mm, yielding a usable 15 to 45 mm range; retract remains full. The built-in -S magnet works with AirTAC reed or electronic solid-state switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.