
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-40 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X45-40 is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop from 5 to 45 mm directly on your equipment.
Its short riveted body drastically reduces axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without switching to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X45-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 5 to 45 mm during machine changeovers to position forming tools accurately without fabricating new spacer shims.
Use the M8x1.25 adjuster screw to find the optimal contact point for alignment fingers during initial prototype setup before locking the final position.
Operators requiring frequent trial positioning or rapid format changes will benefit from the 40 mm on-site adjustment window. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder drifts if air is lost or the valve centres, so integrate an external rod lock or pilot-operated check valve for load holding. Confirm your required 5-45 mm extend range, M5x0.8 port, female M5x0.8 rod thread, and the absence of a magnet for this configuration.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the external R (M8x1.25) screw mechanically shortens the extend end position by up to 40 mm, allowing usable strokes between 5 and 45 mm. It sets the stop position only and does not alter the output force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.