
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X5-10S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X5-10S is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop down to a 0-5 mm window without changing parts. The short riveted body minimizes axial footprint, fitting where larger profile cylinders cannot.
Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches mounted directly into the body grooves. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X5-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop on-site via the M8x1.25 screw when switching production lines to different material thicknesses, eliminating the downtime of physically swapping cylinders.
Fit the short riveted body into dense packaging machinery to push lightweight components, relying on the fixed NBR bumper to absorb the repetitive end-of-stroke impact.
Choose this specific 5 mm stroke variant with the 10 mm window when you need micro-adjustments during initial tooling setup or frequent product changeover.
Confirm the 25 mm bore, 5 mm maximum stroke, 10 mm adjustability window, and M5x0.8 air port suit your manifold. The -S magnet code ensures switch readiness, and the rod features a standard female M5x0.8 end thread. Remember that the mechanical stop and fixed bumper do not secure the load; if air pressure drops or the valve centers, you will need an external rod lock or pilot-operated check valve to prevent drift.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The external M8x1.25 screw shortens the extend end-position within a 0-5 mm usable range without altering the output force. The included -S piston magnet enables position sensing using AirTAC reed or electronic switches, while a fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.