
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-20 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X50-20 is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. An external M8x1.25 adjuster screw lets you dial the forward stop from 30 to 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.
The short riveted body minimizes axial mounting depth where space is tight, and end-of-stroke deceleration is handled by a fixed NBR bumper. Note that this specific SKU lacks a piston magnet and therefore cannot support reed or electronic sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 50 mm via the M8x1.25 screw to accommodate varying part heights on machining lines without swapping cylinders.
Set precise material bend angles by adjusting the forward stop position during trial runs, locking in the exact 30-50 mm depth required.
This 25 mm bore fits well when the smaller variant underpowers your tooling and the larger introduces excessive bulk. It suits operators needing frequent on-site stroke tuning between 30 and 50 mm.
Confirm the 50 mm maximum stroke, 20 mm adjustment window, and M5x0.8 air port match your manifold. This base model has a female M5x0.8 rod-end thread and no magnet. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and does not lock. For secure vertical holding, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 343.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external M8x1.25 screw shortens the extend end position by up to 20 mm, giving a usable forward range of 30 to 50 mm. It acts purely as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.