
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X50-40B is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the forward stroke down from the 50 mm maximum to as little as 10 mm directly at the machine, eliminating the need for shims or part swaps.
This variant features a male M8x1.25 piston rod thread and a 10 mm rod diameter. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 50 mm |
| Adjustable range | 10 – 50 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 50 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Tune the male M8 rod extension precisely for different box profiles on the fly, ensuring crisp folds without over-travel damage.
Sweep through the 40 mm adjustment window during R&D cycle testing to find the exact 245.4 N contact point before finalizing a design.
Choose this model if your fixture requires frequent on-site stroke tuning between 10 and 50 mm.
Verify your parameters: 25 mm bore, 50 mm max stroke, 40 mm adjustment window, M5x0.8 port, male M8x1.25 rod thread, and no magnet. Note that a plain SDAJ does not hold a load if air pressure drops or the valve centers—the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 343.6 N and the pull to 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa.
Turning the M8x1.25 R screw shortens the extend stop by up to 40 mm, yielding a usable forward range of 10 to 50 mm. This mechanism acts solely as a mechanical stop and does not alter the output force. It is not a mid-stroke lock; the cylinder cannot hold a load if air is lost, so use an external rod lock for holding requirements.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.