verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke55 mm
  • Adjustable range45–55 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$37.19 $44.69Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10

The AirTAC SDAJ25X55-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the forward end-position anywhere between 45 and 55 mm directly on the machine, eliminating the need for shims or part swaps during setup. Retract travel remains full length.

The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke55 mm
Adjustable range45 – 55 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×55Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10 Is Used

precision_manufacturing

Trial Positioning

Dial in the exact 45-55 mm extend stop during prototype tooling setups without disassembling the fixture or swapping cylinders.

conveyor_belt

Changeover Stops

Adjust the mechanical end stop on the fly when switching between product sizes on a packaging line, saving valuable changeover time.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10 the Right Cylinder?

Stepping down to the SDAJ20 yields 157.1 N, whereas moving up to the SDAJ32 provides 402.1 N, making this model the middle ground for moderate loads.

Choose this specific SKU if your fixture requires on-site stroke tuning within the 45-55 mm window. Verify your requirements for the M5x0.8 port, female M5x0.8 rod-end thread, and the 10 mm adjustment range. Note that this base configuration lacks a piston magnet, so it cannot accept reed or electronic switches. Furthermore, a plain cylinder does not hold its load on air loss or when the valve is centered; utilize an external rod lock or pilot-operated check valve for secure load holding.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10 FAQ

Turning the R (M8x1.25) screw shortens the extend stroke by up to 10 mm, allowing you to set the forward stop anywhere between 45 and 55 mm. It acts strictly as a mechanical stop and does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X55-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.