
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-30 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X55-30 is a compact double-acting double-rod cylinder engineered for on-site stroke tuning. An external M8x1.25 adjuster screw lets you dial the extend stop anywhere between 25 and 55 mm, eliminating the need for shims or part swaps during commissioning.
Housed in a short riveted body, this unit saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 55 mm on the machine to accommodate different jig heights without machining new spacers.
Set the precise 12.5 kg vertical insertion depth for locating pins during prototype assembly runs before locking the M8 screw.
When sizing this 25 mm bore, evaluate your force requirements against its neighbours.
Choose this adjustable model if your application involves frequent changeovers or trial positioning. Confirm your parameters: 25 mm bore, 55 mm maximum stroke, 30 mm adjust window, and an M5x0.8 port. Keep in mind the fixed NBR bumper only decelerates the stroke end; a plain cylinder does not hold position on air loss or valve centring. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 343.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external M8x1.25 screw mechanically shortens the extend end-position. You can set the usable extend stroke anywhere from 25 mm up to the full 55 mm. The retract stroke remains full, and the adjuster does not alter the cylinder's output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.