
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X55-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the forward stroke down by up to 30 mm directly on the machine, yielding a usable extend range of 25 to 55 mm without swapping shims or parts. Retract travel remains full length.
Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. The included piston magnet supports AirTAC reed or electronic switches for end-position sensing. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. With a 10 mm rod and an M5x0.8 air port, this unit operates at speeds from 30 to 500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 25 to 55 mm extend position during product family changeovers using the M8x1.25 screw, avoiding the need to physically swap cylinder shims for varying part heights.
Ideal for prototype assembly jigs where the optimal extend point is unknown, letting engineers safely test positions within the 30 mm adjustment window before locking the screw.
When sizing this 25 mm bore, evaluate your force requirements both ways. Choose this specific unit if your fixture setup requires frequent on-machine stroke tuning between 25 and 55 mm.
Remember that a plain compact cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the stroke near its end and the M8x1.25 adjuster acts as a mechanical stop, neither function serves as a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 55 mm maximum stroke, 30 mm window, M5x0.8 port, built-in magnet, and female M5x0.8 rod-end thread before ordering.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 50 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and functions at speeds of 30-500 mm/s across a temperature range of -20 to +70 C.
The -S suffix indicates a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.