
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X55-40B is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw. Turning this R screw lets you dial the extend stop down from the 55 mm maximum to any point between 15 and 55 mm directly on your machine, eliminating the need for shims or part swaps.
This model uses a short riveted body to minimize axial mounting depth in tight machinery spaces. It features a male M8x1.25 piston rod thread, an M5x0.8 air port, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 55 mm |
| Adjustable range | 15 – 55 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the push position on carton erecting lines, using the fixed NBR bumper to absorb the impact of repeated high-speed folding motions.
Set a precise material bend depth on the fly, relying on the 25 mm bore's 12.5 kg vertical lift capacity to position heavy metal blanks accurately.
This 25 mm bore is ideal if the 20 mm falls short on thrust but you want to avoid the larger footprint of the 32 mm.
Choose this configuration if your application requires frequent on-site stroke tuning during setup or changeovers. Confirm the 15-55 mm adjust window, M5x0.8 port, and male M8x1.25 rod thread suit your tooling. Remember that a plain cylinder does not hold a load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The air port is M5x0.8.
The external R screw shortens the extend stroke by up to 40 mm, giving a usable range of 15 to 55 mm without changing parts. This specific SKU lacks a piston magnet, so it cannot accept switches; you must specify the -S option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.