
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-50B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X55-50B is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop anywhere between 5 and 55 mm directly on your machine.
Its short riveted body drastically cuts axial mounting depth where round-body or larger profile units will not fit. This specific SKU includes a male M8x1.25 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-travel shock is handled strictly by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 55 mm |
| Adjustable range | 5 – 55 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 55 mm to test multiple part lengths on a single fixture without machining new spacers.
Fine-tune the male M8 rod extension on-site to accommodate varying box heights during rapid format changeovers.
This model is ideal for setups requiring frequent on-machine stroke tuning without swapping shims or components. Confirm your spec sheet matches the 55 mm maximum stroke, 50 mm adjust window, M5x0.8 air port, and the male M8x1.25 rod thread. Remember that a plain SDAJ will not hold a load if air pressure drops or the valve centers—the fixed bumper only decelerates near the end of travel, so deploy an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.
Turning the external M8x1.25 R screw shortens the extend stroke by up to 50 mm, allowing usable end positions between 5 and 55 mm without changing parts. This specific SKU lacks a piston magnet, so it cannot accept AirTAC reed or electronic switches; you must select the -S option code to enable sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.