
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-75S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X55-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke down by up to 75 mm, yielding a usable extend range of 0 to 55 mm directly on the machine without swapping shims or parts.
The short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 55 mm |
| Adjustable range | 0 – 55 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 55 mm via the M8 screw to accommodate varying jig heights on machining lines without fabricating custom spacers.
Use the 0-55 mm external stop to trial different actuation endpoints during R&D setup, relying on the fixed NBR bumper to absorb end shocks.
This SDAJ25X55-75S sits perfectly in the middle at 245.4 N, making it ideal when the smaller bore lacks thrust.
This model suits applications requiring frequent on-site stroke tuning during changeovers. Confirm your parameters: 25 mm bore, 55 mm nominal stroke, 75 mm adjustment window, M5x0.8 port, female M5x0.8 rod thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold position on air loss or valve centering; the bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the operating speed range is 30-500 mm/s.
The R (M8x1.25) screw shortens the extend stroke by up to 75 mm, giving a usable extend range of 0 to 55 mm. The screw acts purely as a mechanical stop and does not alter force. Because this model includes the -S magnet, it supports both AirTAC reed and electronic solid-state switches mounted directly in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.