
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-10B is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjuster screw that lets you dial the extend stop down from 60 mm to 50 mm directly on the machine. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.
This specific SKU includes a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking mechanism. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 50-60 mm extend position during initial tooling commissioning to achieve exact contact without machining custom spacers.
Quickly rotate the M8x1.25 screw to accommodate minor height differences when switching between product families on a packaging line.
This model is ideal for setups requiring frequent changeovers or trial positioning, as the 10 mm adjustment window prevents the need for shims or part swaps. Remember that a plain cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Please confirm your bore, stroke, window, M5x0.8 port, male M8 rod thread, and lack of magnet before ordering.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The M8x1.25 R screw shortens the extend stroke by up to 10 mm, giving a usable range of 50-60 mm. It acts only as a mechanical stop and does not alter force; the cylinder cannot hold a load on air loss, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.