
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-20 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-20 is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke anywhere between 40 and 60 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body conserves axial mounting depth in tight spaces. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 60 mm during machine changeovers to accommodate different part heights without fabricating new spacers.
Establish exact material bend angles by adjusting the outward stroke on the fly during initial prototype runs before locking the final position.
Dropping down to an SDAJ20 yields 157.1 N, while stepping up to an SDAJ32 provides 402.1 N.
Choose this adjustable model for assembly lines requiring frequent changeovers or trial positioning. Remember that a plain cylinder will not hold a load if air pressure drops or the valve centres; the piston drifts and the bumper only decelerates near the end of the stroke. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 60 mm maximum stroke, 20 mm window, M5x0.8 port, female rod thread, and lack of magnet for this configuration.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
Turning the M8x1.25 adjuster screw shortens the extend stroke by up to 20 mm, giving a usable range of 40 to 60 mm. The retract stroke remains full length. This specific SKU has no piston magnet, so it cannot accept magnetic switches; you must select the -S option to enable reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.