
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-30B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-30B is a double-acting compact cylinder featuring an external extend stop. A M8x1.25 adjuster screw lets you dial the outward stroke on-site between 30 and 60 mm without changing parts.
Its short riveted body minimizes axial footprint where space is tight. This specific SKU includes a male M8x1.25 piston rod and lacks a piston magnet, meaning it cannot host reed or solid-state switches. End-of-travel deceleration relies on a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 60 mm during machine changeovers to accommodate different part heights without fabricating new spacers.
Iteratively set the exact outward reach for a 12.5 kg vertical lift jig, locking the male M8 rod at the optimal point.
When sizing, compare this 25 mm bore offering against adjacent diameters.
Choose this configuration if your fixture requires frequent on-machine stroke tuning. Note that a plain actuator drifts when air is lost or the valve centers; the bumper only decelerates near the end. For load holding, install an external rod lock or pilot-operated check valve. Confirm your bore, 60 mm max stroke, 30 mm window, M5x0.8 port, male M8 rod thread, and lack of magnet.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum is 50 kgf at 1.0 MPa.
Turning the external M8x1.25 screw shortens the extend stop by up to 30 mm, yielding a usable range of 30 to 60 mm. This SKU lacks the -S magnet, so it cannot accept sensing switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.