
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the forward end-position anywhere between 30 and 60 mm directly on your machine, avoiding shims or part swaps.
This 25 mm bore unit saves valuable axial mounting depth thanks to its short riveted body, fitting where round-body or profile cylinders cannot. It carries the -S option for a built-in piston magnet, enabling position sensing with AirTAC reed or electronic switches. End-of-travel energy is managed by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 60 mm via the M8x1.25 screw to accommodate varied part widths without machining new spacers.
Use the 30 mm adjustment window to find the exact contact point for a forming press before locking down the final mechanical stop.
Choose this specific model if your fixture requires frequent on-site stroke tuning between 30 and 60 mm during changeovers. Confirm the bore (25 mm), full stroke (60 mm), adjustment window (30 mm), M5x0.8 port, and the female M5x0.8 rod-end thread. Remember that a plain cylinder does not hold a load if air pressure drops or the valve is centred; for vertical load holding without live pressure, you must add an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa the push is 343.6 N and the pull is 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
The R (M8x1.25) screw mechanically shortens the forward stroke by up to 30 mm, giving a usable extend range of 30 to 60 mm without altering the force. The -S suffix means it has a built-in piston magnet for use with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.