
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-40B is a compact double-acting double-rod cylinder featuring an external extend stop. By turning the R (M8x1.25) adjuster screw, you shorten the outward stroke by up to 40 mm, dialling the end position anywhere between 20 and 60 mm directly on your machine without shims or part changes.
The short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. This specific SKU includes a male-threaded piston rod (M8x1.25) for secure external mounting, running on an M5x0.8 air port. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. Note that this SKU lacks a piston magnet and therefore cannot support sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 60 mm via the M8x1.25 screw to tune clamping depth on parts of varying heights without fabricating new spacers.
Use the male M8x1.25 rod to mount custom tooling, relying on the mechanical stop to set precise trial end-positions safely before finalizing a fixed-length design.
Choose this model if your fixture requires frequent on-site stroke tuning during changeovers.
Confirm the 25 mm bore, 60 mm maximum stroke, 40 mm adjust window, and M5x0.8 port suit your pneumatic layout. This variant uses a male M8x1.25 rod thread and has no magnet (-S omitted), meaning reed or electronic switches cannot be fitted. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the R (M8x1.25) screw shortens the extend stroke by up to 40 mm, yielding a usable 20 to 60 mm range. The screw acts as a mechanical stop and does not alter force. It is not a mid-stroke lock; the piston drifts if air is lost, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.