
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-40S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-40S is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the forward end-position anywhere between 20 and 60 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
The short riveted body significantly reduces axial mounting depth where a round-body or profile cylinder cannot fit. This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke. The bumper is not an adjustable air cushion, nor is the adjuster screw a mid-stroke lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for prototyping stations where the exact reach is unknown; set the mechanical stop precisely, knowing the fixed NBR bumper will decelerate the 12.5 kg safe payload at the end of travel.
The short riveted body saves valuable axial depth in multi-axis machinery, while the on-machine adjustability handles varied product widths without requiring a full teardown.
It is the ideal choice for operators who require frequent on-site stroke tuning between 20 and 60 mm without changing hardware.
Verify your requirements against the following specs: 25 mm bore, 60 mm maximum stroke, 40 mm adjust window, M5x0.8 port, built-in magnet (S), and a female M5x0.8 rod-end thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred—the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 50 kgf at 1.0 MPa. Adjusting the stroke does not alter these force values.
The M8x1.25 adjuster screw shortens the extend stroke by up to 40 mm, allowing an operational range of 20 to 60 mm. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing, while a fixed NBR bumper handles end-of-stroke deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.