
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-50 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-50 is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke anywhere between 10 and 60 mm directly at the machine, eliminating the need for shims or part swaps.
Its short riveted body drastically cuts axial mounting depth where round-body units will not fit. The bore accepts an M5x0.8 port and uses a fixed NBR bumper to absorb end-of-travel shock rather than an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose an -S variant if sensing is required.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 10 to 60 mm reach for a gripper during initial commissioning without machining new spacers.
Fine-tune the extension point precisely during experimental fixture trials where 12.5 kg vertical lift is sufficient.
When sizing this 25 mm bore, verify your thrust needs against its neighbours. Choose the 25 mm option when you need moderate force plus extensive on-site stroke tuning across the 50 mm window.
Confirm your requirements for bore, 60 mm maximum stroke, 50 mm adjust window, M5x0.8 port, female M5x0.8 rod thread, and the absence of a magnet. Note that a plain cylinder drifts if air pressure drops or the valve centres; the fixed bumper only decelerates near the end and the mechanical stop is not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The adjuster does not alter these force values.
Turning the M8x1.25 R screw shortens the extend end position by up to 50 mm, giving a usable outward range of 10 to 60 mm. Retract remains full, and the screw acts purely as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.