
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-50B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-50B is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external R (M8x1.25) adjuster screw lets you dial the forward stop from 10 to 60 mm directly on the machine, eliminating the need for shims or part swaps. The short riveted body saves valuable axial mounting depth where a round-body cylinder will not fit.
This specific SKU includes a male-thread M8x1.25 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 60 mm to test multiple part lengths on a single fixture without machining new spacers.
Use the M8x1.25 male rod to secure a clamp, then turn the R screw to find the exact holding position before final lockdown.
Choose this male-rod (M8x1.25) configuration when your tooling requires a threaded attachment point.
Engineers who frequently change tooling or require trial positioning will benefit from the 50 mm adjustment window. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 60 mm maximum stroke, 50 mm window, M5x0.8 port, and male rod thread before ordering.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The M8x1.25 R screw mechanically shortens the extend stroke by up to 50 mm, allowing usable positions between 10 and 60 mm; it does not alter force. This specific SKU lacks a piston magnet, so it cannot accept switches—the -S variant is required for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.