
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-75B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X60-75B is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that lets you dial the extend stop from 0 to 60 mm directly on the machine. This specific SKU includes a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S option.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit, while end-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Operating at speeds of 30-500 mm/s, this unit accepts standard AirTAC compact-cylinder accessories and uses an M5x0.8 air port.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X60-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 60 mm |
| Adjustable range | 0 – 60 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 60 mm on the fly to probe multiple part heights without swapping out cylinders or adding mechanical shims.
Use the male M8x1.25 rod end in test fixtures to fine-tune the exact extend distance, finding the optimal contact point before finalizing a machine design.
Choose this model when your fixture requires frequent on-site stroke tuning to accommodate varying part heights or trial positioning.
Verify your setup requires a 60 mm maximum stroke with a 75 mm adjustment window, an M5x0.8 port, and the male M8x1.25 rod thread denoted by the -B code. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred—the piston will drift and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The air port is M5x0.8.
Turning the external R (M8x1.25) screw shortens the extend stroke by up to 75 mm, giving a usable extend range of 0-60 mm while retract remains full. This specific SKU lacks a piston magnet, so it cannot take a magnetic switch; you would need the -S variant to enable reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.