
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X65-20 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M8x1.25 adjuster screw lets you dial the outward stroke anywhere between 45 and 65 mm without changing parts.
The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 65 mm |
| Adjustable range | 45 – 65 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 65 mm on the fly to accommodate different jig heights during machine changeovers without fabricating new spacers.
Set intermediate mechanical stops during initial commissioning to find the exact contact point for a 12.5 kg vertical lift before locking the adjuster.
Choose this adjustable model for setup-heavy lines requiring frequent trial positioning. Confirm your parameters: 25 mm bore, 65 mm max stroke, 20 mm adjust window, M5x0.8 port, female rod-end thread, and no magnet. Remember that the fixed bumper decelerates the stroke but does not lock the load; for position holding without live air pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M8x1.25 screw mechanically shortens the extend stroke from the 65 mm maximum down to 45 mm. It acts purely as an end stop and does not alter force or lock mid-stroke; the cylinder drifts if air pressure is lost, so use a pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.