
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X65-20B is a compact double-acting double-rod cylinder featuring an external extend-stop mechanism. By turning the R (M8x1.25) adjuster screw, you can shorten the forward stroke by up to 20 mm directly on the machine, yielding a usable extend range of 45 to 65 mm without swapping shims or parts.
This variant features a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 65 mm |
| Adjustable range | 45 – 65 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 65 mm via the R screw when swapping machining fixtures, ensuring precise tool contact without machining new spacers.
Choose this specific model when your fixture requires on-site stroke tuning between 45 and 65 mm, uses an M5x0.8 port, and needs the male M8x1.25 rod end.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your setup requires the 65 mm maximum stroke, 20 mm window, and no magnet before ordering.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, tolerates -20 to +70 C, and runs at 30-500 mm/s.
The M8x1.25 R screw mechanically shortens the extend end-position by up to 20 mm, giving a usable forward travel of 45 to 65 mm. This SKU lacks a piston magnet, so it cannot take magnetic switches; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.