verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke65 mm
  • Adjustable range45–65 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.63 $52.13Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S

The AirTAC SDAJ25X65-20S is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M8x1.25 adjuster screw lets you dial the forward stop anywhere between 45 and 65 mm, eliminating the need for shims or part swaps during changeovers.

This thin riveted-body design minimizes axial mounting depth where larger profile or round-body units will not fit. The unit features a built-in piston magnet for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke65 mm
Adjustable range45 – 65 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×65Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 45 to 65 mm during machine setup to accommodate different part lengths without swapping out the entire actuator assembly.

straighten

Trial Positioning

Find the exact contact point for a 12.5 kg vertical lift by turning the M8x1.25 adjuster screw on the fly during initial commissioning.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S the Right Cylinder?

When sizing this 25 mm bore actuator, evaluate both neighboring options. Stepping down to the SDAJ20 reduces the 0.5 MPa push force to 157.1 N, whereas stepping up to the SDAJ32 increases it to 402.1 N. Choose this specific model if your fixture requires exact 45-65 mm extend tuning without disassembly. Confirm your setup needs an M5x0.8 air port, a female M5x0.8 rod-end thread, and the integrated -S magnet.

Remember that a standard compact cylinder does not hold position upon air loss or valve centering; the piston drifts. The fixed bumper only decelerates near the stroke end and is never a lock. For suspended or gravity-loaded applications requiring fail-safe holding, incorporate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S FAQ

The M8x1.25 screw shortens the extend end-position by up to 20 mm, giving a usable forward range of 45 to 65 mm while retract remains full. The -S option includes a piston magnet for AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X65-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.