
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X65-30S is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke on the machine, setting the end position anywhere between 35 and 65 mm without changing parts.
This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 65 mm via the M8x1.25 screw to accommodate varying jig heights during production line changeovers.
Leverage the built-in magnet with electronic switches to verify exact extend endpoints for test fixtures requiring 12.5 kg vertical lifts.
When sizing this 25 mm bore, evaluate your force needs both ways.
Choose this model for setups requiring frequent on-machine stroke tuning between 35 and 65 mm. Confirm the 10 mm rod, M5x0.8 port, female M5x0.8 rod thread, and the -S magnet for your sensing requirements. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external R (M8x1.25) screw shortens the extend stroke by up to 30 mm, giving a usable range of 35 to 65 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.