
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-75SB is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X65-75SB is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop from 0 to 65 mm directly on your machine. The short riveted body minimizes axial mounting depth, fitting where larger profile cylinders cannot.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M8x1.25 rod end. End-of-travel shock is absorbed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 65 mm |
| Adjustable range | 0 – 65 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 65 mm via the M8x1.25 screw to set new tooling depths rapidly during product family changeovers without swapping cylinders.
Fine-tune the extend endpoint during prototype testing to find the exact 12.5 kg vertical lift margin before locking down the final mechanical stop.
Choose this model when frequent line changeovers require on-site stroke tuning without part swaps.
Confirm the 65 mm maximum stroke, 75 mm adjust window, and M5x0.8 port. The -S code provides the magnetic piston for position sensing, and -B specifies the male M8x1.25 rod thread. Remember that a plain cylinder does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The external M8x1.25 screw shortens the extend stop by up to 75 mm, yielding a usable 0 to 65 mm extend range. The -S code adds a piston magnet compatible with AirTAC reed or electronic solid-state switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.