
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X70-10B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke down by 10 mm, providing a usable extend range of 60 to 70 mm directly on the machine without swapping shims or parts.
This thin riveted-body design saves valuable axial mounting depth where round-body or profile cylinders cannot fit. The unit arrives with a male M8x1.25 piston rod (-B option) for secure tooling attachment, runs at speeds of 30-500 mm/s, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 60-70 mm extend stop on the machine to set a precise machining datum, absorbing part tolerance variations without disassembling the fixture.
Press bearings or pins to a specific depth using the male M8x1.25 rod, relying on the mechanical stop rather than fragile pneumatic pressure settings.
When sizing this 25 mm bore actuator, evaluate both neighboring options. Choose this 70 mm stroke unit with the 10 mm adjust window when your fixture requires on-site outward tuning to hit a precise datum.
Confirm your parameters: 25 mm bore, 70 mm maximum stroke, 10 mm adjustment window, and an M5x0.8 air port. The male M8x1.25 rod thread must match your mating interface, and you must avoid side loading to prevent premature seal wear. Because a standard cylinder drifts when air is lost or a valve centers, the fixed bumper only decelerates near the end of travel and does not act as a lock. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 50 kgf at 1.0 MPa.
Turning the M8x1.25 R screw shortens the extend stop by up to 10 mm, giving a usable outward range of 60 to 70 mm. The screw functions purely as a mechanical end stop and does not alter the force or lock the piston mid-stroke. This SKU has no magnet, but adding the -S option enables reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.