
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-20S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X70-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M8x1.25 adjuster screw lets you dial the forward end-position anywhere between 50 and 70 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This model includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stroke from 50 to 70 mm on the fly to clamp varying part widths without swapping out entire cylinder assemblies.
Leverage the compact riveted body and on-machine adjustability to rapidly reset end positions for different product runs in tight automation cells.
Choose this specific model if your fixture requires frequent on-site stroke tuning within the 50-70 mm window. Confirm your setup needs the M5x0.8 air port, female M5x0.8 rod thread, and the integrated magnet for position sensing.
Remember that a plain compact cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the stroke near the end and the M8 screw acts as a mechanical stop, neither function as a brake. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 50 kgf at 1.0 MPa.
The external R (M8x1.25) screw shortens the extend stop by up to 20 mm, giving a usable forward range of 50-70 mm. The -S suffix indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.