verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke70 mm
  • Adjustable range40–70 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$46.49 $53.99Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S

The AirTAC SDAJ25X70-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the forward end-position anywhere between 40 and 70 mm directly on the machine, eliminating the need for shims or part swaps.

Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. The unit relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), this model supports AirTAC reed or electronic switches for precise end-of-stroke detection.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke70 mm
Adjustable range40 – 70 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×70Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 40 to 70 mm via the M8x1.25 screw during machine changeovers to accommodate varying part widths without swapping hardware.

straighten

Trial Positioning Stops

Use the 30 mm adjustment window to fine-tune the mechanical stop during initial commissioning, locking in the exact 12.5 kg vertical lift position.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S the Right Cylinder?

When sizing this 25 mm bore actuator, evaluate your force requirements both ways. Stepping up to an SDAJ32 provides 402.1 N, offering a sturdier option if your payload increases.

This model is ideal for setups requiring frequent on-machine stroke tuning or trial positioning. Confirm your specifications: 25 mm bore, 70 mm maximum stroke, 30 mm adjust window, M5x0.8 port, female M5x0.8 rod thread, and the -S magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S FAQ

The external R (M8x1.25) screw shortens the extend stroke by up to 30 mm, giving a usable range of 40 to 70 mm. The built-in -S magnet allows tracking by AirTAC reed or electronic solid-state switches. The screw sets the stop position and does not alter force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X70-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.