
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-75S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X70-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the extend position anywhere from 0 to 70 mm directly on the machine without changing parts.
Its short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, and the built-in -S magnet supports AirTAC reed or electronic switches for end-of-stroke confirmation.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 70 mm |
| Adjustable range | 0 – 70 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Swap product families rapidly by turning the M8x1.25 adjuster screw to reposition the stroke limit for varied part widths on the same fixture.
Choose this model if your fixture requires frequent on-machine stroke tuning between 0 and 70 mm.
Confirm your requirements for the 70 mm maximum stroke, 75 mm adjustment window, M5x0.8 port, and the female M5x0.8 rod-end thread. The -S magnet enables position sensing, but note that a plain cylinder does not hold a load on air loss or valve centring; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The R (M8x1.25) screw shortens the extend stop by up to 75 mm, yielding a usable extend range of 0 to 70 mm while retract remains full. The -S option adds a built-in piston magnet compatible with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.