
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-30SB is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-30SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the forward end-position anywhere between 45 and 75 mm directly on the machine, eliminating the need for shims or part swaps.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male M8x1.25 thread (-B) on the 10 mm rod. The short riveted body saves valuable axial mounting depth where larger profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 45 to 75 mm extend position during setup to clamp varying part widths without machining custom spacers.
Use the M8x1.25 male rod and fine-tune the 245.4 N extend stop to find the exact sensing distance before locking the collar.
Quickly reposition the mechanical stop on the line when switching product families, relying on the fixed NBR bumper for end shock.
When sizing this unit, evaluate your force requirements both ways.
Choose this specific configuration if your fixture requires frequent changeovers or trial positioning. Confirm the 25 mm bore, 75 mm maximum stroke, 30 mm adjustment window, M5x0.8 port, male M8x1.25 rod, and the integrated magnet. Note that a plain cylinder does not hold position if air pressure drops or the valve is centred; integrate an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The R (M8x1.25) screw mechanically shortens the extend stroke by up to 30 mm, yielding a usable 45 to 75 mm range without altering force. The included -S magnet allows tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.