
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40SB is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-40SB is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. An external M8x1.25 R adjuster screw lets you dial the forward stop anywhere between 35 and 75 mm directly on the machine.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and features a male M8x1.25 threaded rod end. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M8x1.25 rod end position on-site to accommodate varying box heights, ensuring precise folding without reprogramming the motion controller.
Utilize the compact riveted body to fit within tight machine frames while using the integrated magnet to confirm clamp extension before initiating the machining cycle.
When sizing this unit, consider the neighboring bores.
Choose this model if your fixture requires frequent on-machine stroke tuning during changeovers. Confirm your requirements for a 25 mm bore, 75 mm maximum stroke, 40 mm adjust window, M5x0.8 port, male M8x1.25 rod thread, and the integrated magnet. Note that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates the stroke end and does not function as a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 50 kgf at 1.0 MPa.
Turning the M8x1.25 R screw shortens the extend stroke by up to 40 mm, allowing usable forward positions between 35 and 75 mm without changing parts. The built-in magnet enables position detection using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.