
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-75S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-75S is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M8x1.25) adjuster screw lets you dial the extend position from 0 to 75 mm directly on the machine, eliminating shims or part swaps during changeovers. Retract remains full length.
The short riveted body minimizes axial mounting depth where round-body or profile units will not fit. This unit includes a built-in magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 75 mm via the M8x1.25 screw to set new datum points during fixture swaps without machining new spacers.
Sweep the extend length during R&D trials to find the exact engagement point, relying on the compact riveted body to fit dense test rigs.
Dropping to SDAJ20 provides 157.1 N, while stepping up to SDAJ32 yields 402.1 N.
Choose this model if your fixture requires frequent trial positioning or on-site stroke tuning. Confirm the 75 mm maximum stroke, 75 mm adjustment window, M5x0.8 port, female M5x0.8 rod thread, and the -S magnet. Note that a plain cylinder drifts on air loss or valve centering; the fixed NBR bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 R screw shortens the extend stroke by up to 75 mm, giving a usable extend range of 0 to 75 mm; retract is unaffected. The included -S magnet works with AirTAC reed or electronic solid-state switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.