
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X80-100S is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop from 0 to 80 mm directly on your machine.
Its short riveted body drastically saves axial mounting depth where round-body or larger profile cylinders cannot fit. The integrated piston magnet supports AirTAC reed or electronic switches for position sensing, while fixed NBR bumpers decelerate the piston at the stroke extremes without acting as a lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 80 mm |
| Adjustable range | 0 – 80 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 80 mm during prototype runs to find the exact 12.5 kg vertical lift point without machining new spacers.
Reposition a package diverter on the fly using the M8x1.25 screw, accommodating varying carton lengths on a shared line.
Stepping down to the SDAJ20 yields 157.1 N, whereas moving up to the SDAJ32 offers 402.1 N.
This model is tailored for setups requiring frequent on-site stroke tuning without changing parts. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 80 mm stroke, 100 mm window, M5x0.8 port, built-in magnet, and female M5x0.8 rod-end thread.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The external M8x1.25 screw shortens the extend stop by up to 100 mm, allowing usable extend positions between 0 and 80 mm. The included -S magnet works with AirTAC reed or electronic switches for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.