
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X80-20B is a compact double-acting double-rod cylinder built for on-site extend-position tuning. An external M8x1.25 adjuster screw lets you shorten the forward stroke by up to 20 mm, yielding a usable extend range of 60 to 80 mm without swapping shims or parts.
This variant features a male M8x1.25 piston rod thread and omits the piston magnet. The short riveted body minimizes axial mounting depth where space is tight, while a fixed NBR bumper decelerates the stroke end. Operating speed spans 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 to 80 mm via the M8x1.25 screw to match varying jig heights during production line changeovers without machining new spacers.
Choosing this 25 mm bore involves sizing against its neighbors. It is tailored for machines requiring frequent changeovers where the 60 to 80 mm forward position must be dialed in physically.
Confirm the 25 mm bore, 80 mm maximum stroke, 20 mm adjust window, and M5x0.8 air port for your manifold. This SKU includes the male M8x1.25 rod thread (-B) and lacks a magnet, so position sensing is unavailable unless you specify the -S option. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure is 0.15 to 1.0 MPa, with a speed range of 30 to 500 mm/s.
The external R (M8x1.25) screw mechanically shortens the extend stroke by up to 20 mm, allowing you to set the forward stop anywhere between 60 and 80 mm. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select the -S variant to enable sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.