
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-30S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X80-30S is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth. An external M8x1.25 adjuster screw lets you dial the extend stop on-site anywhere from 50 to 80 mm, eliminating the need for shims or part swaps during changeovers.
The integrated -S piston magnet supports AirTAC reed or electronic solid-state switches directly in the body grooves, while a fixed NBR bumper decelerates the stroke ends.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 80 mm |
| Adjustable range | 50 – 80 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 to 80 mm via the M8 screw to accommodate varying jig heights on machining lines without machining new spacers.
Use the integrated magnet with electronic switches to trigger a precise fluid dispense, adjusting the mechanical stop safely within the 30 mm window for trial runs.
It is ideal for operators needing frequent on-machine stroke tuning between 50 and 80 mm. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your requirements for the 25 mm bore, 80 mm max stroke, 30 mm window, M5x0.8 port, -S magnet, and female M5x0.8 rod-end thread.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
It operates at 30-500 mm/s, accepts 0.15-1.0 MPa air pressure, and functions in -20 to +70 C environments.
The -S suffix indicates a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches housed in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.