verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke80 mm
  • Adjustable range40–80 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$50.68 $58.18Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S

The AirTAC SDAJ25X80-40S is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop from 40 to 80 mm directly on your machine. The short riveted body minimizes axial mounting depth, fitting easily where round-body or profile cylinders cannot. This unit includes a built-in piston magnet for AirTAC reed or electronic switches.

End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s. The bore dictates the M5x0.8 air port and a 10 mm rod with a female M5x0.8 rod-end thread. For high kinetic energy applications, consider adding an external shock absorber to smooth the final approach.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke80 mm
Adjustable range40 – 80 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×80Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 40 to 80 mm via the M8x1.25 screw to accommodate varying part widths on machining lines without fabricating custom spacers.

straighten

Trial Positioning

Use the 40 mm adjustment window to find the exact clamping contact point during prototype runs before locking down the final mechanical stop.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S the Right Cylinder?

Choose this specific model if your fixture requires frequent on-site stroke tuning across a 40 mm window during changeovers. Confirm your requirements for the 80 mm maximum stroke, 40 mm adjustability, M5x0.8 port, built-in magnet (-S), and female M5x0.8 rod thread.

Remember that a standard compact cylinder does not hold a load if air pressure drops or the directional valve centers. The piston will drift, and the fixed NBR bumper only decelerates near the stroke end—it is never a mechanical lock. To maintain vertical position without live pressure, integrate an external rod lock or a pilot-operated check valve into your circuit.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S FAQ

The theoretical maximum push is 50 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

Turning the external R (M8x1.25) screw shortens the extend stroke by up to 40 mm, giving a usable range of 40-80 mm without changing parts. The included -S magnet works with both AirTAC reed and solid-state electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X80-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.